b'Filter BagsFilter bags manufactured in-house. Direct to you!Standard Filter manufactures pulse-jet and plenum pulse filter bags that utilize support cages to allow air flow from the exterior of the bag and exiting through the interior.Our bags are sewn under tension with a 3-needle chain stitch to insure seam integrity. Top constructions consist of snap band, flange top, ring top, soft cuffs or raw edge. Bottom removal bags are constructed with a raw top or soft cuff. Top and bottom removal bag bottoms have disc bottoms that are sewn using either an overlock (surge) stitch or lock stitch. We also provide a wear strip or custom skirts to the bottom portion of the bag to prevent premature wear from bag-to-bag and bag-to-cage abrasion.We also provide a wide variety of filter bags for use in shaker type collectors. We manufacture shaker bags from wovens and shakerfelts. Standard Filters engineering department can recommend the media that will give you the performance you expect from your shaker unit.We offer various types of top attachments to work with your shaker mechanism, whether its loop, hanger, strap, grommet or we will design one to fit your specific needs. Our bottom attachments are made with snapbands, corded cuffs or reinforced cuffs for extra wear protection. We also supply clamps for the standard cuff bottoms, as well as other necessary hardware.Standard Filter manufactures a wide variety of reverse air bag types. Typical top designs are strap top, loop top, corded cuff top, compression band tops with steel caps or grommet top bags. Bottom designs can be raw edge, cuffed, compression band or beaded cuff. Anti-collapse rings of mild steel, stainless steel and other alloys can be placed along the bag at the proper points for maximum cleaning efficiency. Standard Filter can also supply clamps for the cuff bottoms.www.standardfilter.com1.800.634.58371.760.929.8559 7'