b'CartridgesStandard Filter offers a wide variety of industrial and commercial cartridge filters. In most cases cartridges can be custom made in various sizes and constructions to fit your specific requirements, along with high temperature capabilities, fire retardant, PTFE membrane, conductive and high efficiency type materials. Standard Filter also provides various pleat spacings and pleat depths.Below is a brief listing of available filter materials and top and bottom constructions.Samples of the 100% Cellulose, 80%/20% Cellulose/Polyester and Spun Bond Polyester materials are available upon request.Paper 100% Cellulose100% Cellulose Basis Weight (lbs per 3000 sq. ft.) .79 lbs.80/20 Cellulose/Polyester Frazier Permeability (CFM/sq. ft. at 0.5 inch H2O) 1250/50 Cellulose/Polyester Caliper Overall (inches) .0.015100% Cellulose Flame Retardant Corrugation Depth (inches) .0.032 Mullen Burst Dry (PSI) 54Synthetic Temperature Limit 200 F100% Spun Bond Polyester100% Spun bond Polyester w/PTFE 80% - 20% Cellulose/Polyester100% Polyester Hydro/Oleophobic Basis Weight (lbs per 3000 sq. ft.) 80lbs.Frazier Permeability (CFM/sq. ft. at 0.5 inch H2O) 14Felt Caliper Overall (inches) .0.029All types, please call for details Corrugation Depth (inches) .0.017Mullen Burst Dry (PSI) 50 Tops Temperature Limit 200 FRound14x16 RectangularFlangeScrew MountGaskets Spun Bond PolyesterBasis Weight (lbs Per 3000 sq. ft.) 81lbs.Bottoms Frazier Permeability (CFM/sq. ft. at 0.5 inch H2O) .28-33Open ClosedClosed with Bolt Hole Mullen Burst Dry (PSI) 287Temperature Limit .275Supports Efficiency (depending on application) .99.95%Various internal and external supports are available upon request Average values listed. Specifications aresubject to change without notification.www.standardfilter.com1.800.634.58371.760.929.8559 17'